| |
Zaveral Racing Equipment hand-makes each pole
to the length you specify. To find your correct size and get an accurate measurement,
you'll need some help, an ordinary ruler and a metal measuring tape marked in
centimeters. All measurements should be made with your boots on and while
standing on a level surface. If you're standing on your skis too, the pole tip
measurement should be to the top of the ski surface, not the floor.
|
| Equipment needed: | | |
- A Helper
- Metal measuring tape in centimeters
- Ordinary Measuring
stick
| Skating-style poles;
To measure, use a ruler to measure from ground level to a point at mustache level.
The distance in centimeters is your correct pole length. Classic
poles; To measure stand up straight while holding a ruler on your shoulder
parallel to the ground. Have a friend measure from the ground up to the ruler.
The distance in centimeters is your correct pole length. To
measure for diagonal stride, subtract 10cm from the skating-style poles(see
above) measurement. Write this Number
down. You can input this measurement when you order. Both poles will be made
the same length unless you specifically request different lengths.
|  |
